Driving with cars with manual transmission is a difficult job, as you need to have excellent driving skills over managing the speed and control of the vehicle. On the other hand, many people also do not like vehicles featuring automatic transmission. That is why automobile manufacturers have probably come up with cars that feature semi-automatic transmission. Such cars come with paddle shifter, which will allow you to change the gears. The best thing is that when you change the gears in semi-automatic vehicles, you do not have to master the art of keeping the vehicle’s clutch in your control. In the following section, you can find some useful and straightforward semi driving tips.
Steps For Semi-Automatic Vehicles – Semi Driving Tips
A step by step guide is provided in the following section for you. Following these steps is vital for seamless driving of the semi-automatic cars.
Step – 1
In the first step, you need to insert the key of the vehicle to turn on the ignition. At the same time, you should keep the foot brake pressed. Now, you need to turn your car to come to the neutral gear. For that, you should pull both paddle shifters towards you. Once this is over, your vehicle will arrive at a neutral position. Keeping the brake pressed with your foot, you should now start the vehicle engine.
Step – 2
To start the vehicle moving, you need to get into the first gear from the neutral position. Disengage the parking brake of the car, in order to come at the first gear. And, then choose to pull back on the right paddle. This will help your vehicle to enter the first gear.
Step – 3
Now, you have to release foot pressure on the brake pedal. After that, you need to put pressure on the gas pedal to accelerate the car. During acceleration, you can further change the gears as necessary while driving. To accelerate more, you need to go to the top gear. In order to reduce speed, you need to shift down the gears. For shifting the gears up, you should pull back on the right paddle. To change the gears down, you need to pull back on the left paddle.
Commonly, experienced drivers change to the higher gear, when the engine reaches around 3000 RPM. When the engine sounds too noisy or working too hard, you can choose to shift up the gear. When you need to reduce the speed of your vehicle, you should shift down the gears. Shifting down gear is required when there is a speed limit on the road where you are driving.
Step – 4
At the last stage, you need to learn about stopping the vehicle. For stopping the car, you should press the “Reverse” button, while you have kept foot pressure on the brake. Now, you need to downshift gears and come at the neutral position gradually. When you arrive at the neutral position, you need to apply the parking brake and then turn off the vehicle engine. Hopefully, these simple and step by step semi driving tips for beginners would help you a lot when you shall drive semi-automatic cars.